SASO关于个人防护设备标准临时更新的通知
沙特SASO个人防护装备及服装（PPE）技术法规现进入更新阶段，现发送临时通知，通知规定除法规附录列明的现有标准外，若产品符合性评定流程符合技术法规规定的对符合性评定流程的要求，也可依据下述标准出具的检测报告，为该法规管控范围内的产品签发合格的产品符合性证书。
请注意，本通知为临时通知，通知有效期将于SASO个人防护装备及服装（PPE）技术法规彻底完成更新或SASO发布其他关于沙特SASO个人防护装备及服装（PPE）技术法规的通知为止。
| 产品描述 | 欧标 | 美标 |
|---|---|---|
| 头部防护设备 | EN 12492 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods 登山装备—登山头盔—安全要求和测试方法 | ANSI/ISEA Z89.1 Industrial Head Protection 工业头部防护 |
| 脸部防护设备 | EN ISO 16321-1 Eye and face protection for occupational use - Part 1: General requirements 职业用眼面部防护—第 1 部分：一般要求 | ANSI/ISEA Z87.1 Occupational and Educational Personal Eye and Face Protection Devices 职业和教育用个人眼面部防护设备 |
| EN ISO 16321-2 Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques 职业用眼面部防护—第 2 部分：焊接及相关工艺中使用的防护器的附加要求 | ||
| EN ISO 16321-3 Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors 职业用眼面部防护—第 3 部分：网状防护器的附加要求 | ||
| EN 14458 Personal eye-equipment - Face shields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services 个人眼部装备—消防员使用的面罩和护目镜，以及消防员、救护人员和紧急救援人员使用的高性能工业安全头盔 | ||
| EN ISO 18526-1 Eye and face protection - Test methods - Part 1: Geometrical optical properties 眼面部防护—测试方法—第 1 部分：几何光学特性 | ||
| EN ISO 18526-2 Eye and face protection - Test methods - Part 2 : Physical optical properties 眼面部防护—测试方法—第 2 部分：物理光学特性 | ||
| EN ISO 18526-3 Eye and face protection - Test methods - Part 3: Physical and mechanical properties 眼面部防护—测试方法—第 3 部分：物理和机械特性 | ||
| EN ISO 18526-4 Eye and face protection - Test methods - Part 4: Headforms 眼面部防护—测试方法—第 4 部分：头模 | ||
| 眼部防护设备 | EN ISO 16321-1 Eye and face protection for occupational use - Part 1: General requirements 职业用眼面部防护—第 1 部分：一般要求 | ANSI/ISEA Z87.1 Occupational and Educational Personal Eye and Face Protection Devices 职业和教育用个人眼面部防护设备 |
| EN ISO 16321-2 Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques 职业用眼面部防护—第 2 部分：焊接及相关工艺中使用的防护器的附加要求 | ||
| EN ISO 16321-3 Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors 职业用眼面部防护—第 3 部分：网状防护器的附加要求 | ||
| EN ISO 18526-1 Eye and face protection - Test methods - Part 1: Geometrical optical properties 眼面部防护—测试方法—第 1 部分：几何光学特性 | ||
| EN ISO 18526-2 Eye and face protection - Test methods - Part 2 : Physical optical properties 眼面部防护—测试方法—第 2 部分：物理光学特性 | ||
| EN ISO 18526-3 Eye and face protection - Test methods - Part 3: Physical and mechanical properties 眼面部防护—测试方法—第 3 部分：物理和机械特性 | ||
| EN ISO 18526-4 Eye and face protection - Test methods - Part 4: Head forms 眼面部防护—测试方法—第 4 部分：头模 | ||
| 被动焊接保护设备 | EN ISO 16321-1 Eye and face protection for occupational use - Part 1: General requirements 职业用眼面部防护—第 1 部分：一般要求 | ANSI/ISEA Z87.1 Occupational and Educational Personal Eye and Face Protection Devices 职业和教育用个人眼面部防护设备 |
| EN ISO 16321-2 Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques 职业用眼面部防护—第 2 部分：焊接及相关工艺中使用的防护器的附加要求 | ||
| EN ISO 16321-3 Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors 职业用眼面部防护—第 3 部分：网状防护器的附加要求 | ||
| EN ISO 18526-1 Eye and face protection - Test methods - Part 1: Geometrical optical properties 眼面部防护—测试方法—第 1 部分：几何光学特性 | ANSI Z49.1 Safety in Welding, Cutting, and Allied Processes 焊接、切割及相关工艺安全 | |
| EN ISO 18526-2 Eye and face protection - Test methods - Part 2 : Physical optical properties 眼面部防护—测试方法—第 2 部分：物理光学特性 | ||
| EN ISO 18526-3 Eye and face protection - Test methods - Part 3: Physical and mechanical properties 眼面部防护—测试方法—第 3 部分：物理和机械特性 | ||
| EN ISO 18526-4 Eye and face protection - Test methods - Part 4: Head forms 眼面部防护—测试方法—第 4 部分：头模 | ||
| 主动焊接保护设备 | EN ISO 16321-1 Eye and face protection for occupational use - Part 1: General requirements 职业用眼面部防护—第 1 部分：一般要求 | ANSI/ISEA Z87.1 Occupational and Educational Personal Eye and Face Protection Devices 职业和教育用个人眼面部防护设备 |
| EN ISO 16321-2 Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques 职业用眼面部防护—第 2 部分：焊接及相关工艺中使用的防护器的附加要求 | ||
| EN ISO 16321-3 Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors 职业用眼面部防护—第 3 部分：网状防护器的附加要求 | ||
| EN ISO 18526-3 Eye and face protection - Test methods - Part 3: Physical and mechanical properties 眼面部防护—测试方法—第 3 部分：物理和机械特性 | ANSI Z49.1 Safety in Welding, Cutting, and Allied Processes 焊接、切割及相关工艺安全 | |
| EN 61482-1-2 Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) 带电作业—电弧热危害防护服—第 1-2 部分：试验方法—方法 2：利用约束和定向电弧（箱式试验）确定材料和服装的电弧防护等级 | ||
| 被动听力保护设备 | EN 458 Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document 听力保护器—选择、使用、保养和维护建议—指导文件 | ANSI/ASA S12.6 Methods for Measuring the Real-Ear Attenuation of Hearing Protectors 测量听力保护器真实耳衰减的方法 |
| EN 13819-1: 2020+A1: 2024 Hearing protectors - Testing - Part 1: Physical test methods 听力保护器—测试—第一部分：物理测试方法 | ANSI/ASA S12.42 Methods for the Measurement of Insertion Loss of Hearing Protection Devices in Continuous or Impulsive Noise Using Microphone-in-Real-Ear or Acoustic Test Fixture Procedures 使用真耳麦克风或声学测试装置程序测量连续或脉冲噪声下听力保护装置插入损失的方法 | |
| EN 13819-2 Hearing protectors - Testing - Part 2: Acoustic test methods 听力保护器—测试—第二部分：声学测试方法 | ANSI/ASA S3.19-1974 Method for the Measurement of Real-Ear Protection of Hearing Protectors and Physical Attenuation of Earmuffs 测量听力保护器真实耳部保护效果和耳罩物理衰减性能的方法 | |
| 主动听力防护设备 | EN 458 Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document 听力保护器—选择、使用、保养和维护建议—指导文件 | ANSI/ASA S12.6 Methods for Measuring the Real-Ear Attenuation of Hearing Protectors 测量听力保护器真实耳衰减的方法 |
| EN 352-4 Hearing protectors - Safety requirements - Part 4: Level-dependent earmuffs 听力保护器—安全要求—第 4 部分：声级相关耳罩 | ||
| EN 352-5 Hearing protectors - Safety requirements - Part 5: Active noise reduction earmuffs 听力保护器—安全要求—第 5 部分：主动降噪耳罩 | ||
| EN 352-6 Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio input 听力保护器—安全要求—第 6 部分：带安全相关音频输入的耳罩 | ANSI/ASA S12.42 Methods for the Measurement of Insertion Loss of Hearing Protection Devices in Continuous or Impulsive Noise Using Microphone-in-Real-Ear or Acoustic Test Fixture Procedures 使用真耳麦克风或声学测试装置程序测量连续或脉冲噪声下听力保护装置插入损失的方法 | |
| EN 352-7 Hearing protectors - Safety requirements - Part 7: Level-dependent earplugs 听力保护器—安全要求—第 7 部分：声级相关耳塞 | ||
| EN 352-8 Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs 听力保护器—安全要求—第 8 部分：娱乐音频耳罩 | ||
| EN 352-9 Hearing protectors - Safety requirements - Part 9: Earplugs with safety-related audio input 听力保护器—安全要求—第 9 部分：带安全相关音频输入的耳塞 | ||
| EN 352-10 Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs 听力保护器—安全要求—第 10 部分：娱乐音频耳塞 | ANSI/ASA S3.19-1974 Method for the Measurement of Real-Ear Protection of Hearing Protectors and Physical Attenuation of Earmuffs 测量听力保护器真实耳部保护效果和耳罩物理衰减性能的方法 | |
| EN 13819-1: 2020+A1: 2024 Hearing protectors - Testing - Part 1: Physical test methods 听力保护器—测试—第一部分：物理测试方法 | ||
| EN 13819-2 Hearing protectors - Testing - Part 2: Acoustic test methods 听力保护器—测试—第二部分：声学测试方法 | ||
| EN 13819-3: 2019+A1: 2024 Hearing protectors - Testing - Part 3: Supplementary acoustic test methods 听力保护器—测试—第 3 部分：补充声学测试方法 | ||
| 跌落保护装置 | EN 795 Personal fall protection equipment - Anchor devices 个人防坠落装备—锚固装置 | ANSI/ASSP Z359.1 The Fall Protection Code 坠落防护规范 |
| EN 1496 Personal fall protection equipment - Rescue lifting devices 个人防坠落装备—救援提升装置 | ANSI/ASSP Z359.2 Minimum Requirements for a Comprehensive Managed Fall Protection Program 综合坠落防护管理计划的最低要求 | |
| EN 13374 Temporary edge protection systems - Product specification - Test methods 临时边缘防护系统—产品规范—测试方法 | ANSI/ASSP Z359.3 Safety Requirements for Lanyards and Positioning Lanyards 系索和定位系索的安全要求 | |
| ANSI/ASSE A10.32 Personal Fall Protection Used in Construction and Demolition Operations 建筑和拆除作业中使用的个人坠落防护 | ||
| 一次性防护服 | EN 1073-2 Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination 放射性污染防护服—第2部分：非通风式颗粒放射性污染防护服的要求和测试方法 | ASTM F1506 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs 阻燃和电弧防护服标准性能规范（适用于暴露于火焰和电弧环境的工人） |
| EN 14126 Protective clothing - Performance requirements and tests methods for protective clothing against infective agents 防护服—传染性病原体防护服的性能要求和测试方法 | ASTM F1670 / F1671 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood 防护服材料抗合成血液渗透性能标准试验方法 | |
| ANSI/ISEA 101 Limited-Use and Disposable Coveralls - Size and Labeling Requirements 限用和一次性防护服—尺寸和标签要求 | ||
| 一次性呼吸器 | EN 143 Respiratory protective devices - Particle filters - Requirements, testing, marking 呼吸防护装置—颗粒过滤器—要求、测试、标识 | NIOSH 42 CFR Part 84 Approval of Respiratory Protective Devices 呼吸防护设备 |
| EN 149: 2001+A1: 2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking 呼吸防护装置—用于防护颗粒物的过滤式半面罩—要求、测试、标识 | ANSI/ISEA 110-2009 Air-Purifying Respiratory Protective Smoke Escape Devices 空气净化呼吸防护烟雾逃生装置 | |
| EN 14683 Medical face masks - Requirements and test methods 医用口罩—要求和测试方法 | ||
| 可重复使用的呼吸器 | EN 136 Respiratory protective devices - Full face masks - Requirements, testing, marking 呼吸防护装置—全面罩—要求、测试、标识 | NIOSH 42 CFR Part 84 Approval of Respiratory Protective Devices 呼吸防护设备 |
| EN 140 Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking 呼吸防护装置—半面罩和四分之一面罩—要求、测试、标识 | ||
| EN 143 Respiratory protective devices - Particle filters - Requirements, testing, marking 呼吸防护装置—颗粒过滤器—要求、测试、标识 | ANSI/ASSE Z88.2 - 2015 Practices for Respiratory Protection 呼吸防护措施 | |
| EN 14387 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking 呼吸防护防护装置—气体过滤器和组合过滤器—要求、测试和标记 | ||
| 动力送风式呼吸器 | EN 12941 Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking 呼吸防护装置—带松散式呼吸接口的动力过滤装置—要求、测试和标记 | NIOSH 42 CFR Part 84 Approval of Respiratory Protective Devices 呼吸防护设备 |
| EN 12942 Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking 呼吸防护装置—带全面罩、半面罩或四分之一面罩的动力过滤装置—要求、测试和标记 | ANSI/ASSE Z88.2 - 2015 Practices for Respiratory Protection 呼吸防护措施 | |
| 供气式呼吸器 | EN 14594 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking 呼吸防护装置—连续流压缩空气管路呼吸装置—要求、测试和标识 | NIOSH 42 CFR Part 84 Approval of Respiratory Protective Devices 呼吸防护设备 |
| EN 14593-1 Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking 呼吸防护装置—带需求阀的压缩空气管路呼吸装置—第 1 部分：带全面罩的装置—要求、测试和标识 | ANSI/ASSE Z88.2 - 2015 Practices for Respiratory Protection 呼吸防护措施 | |
| 逃生用呼吸器 | EN 402 Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking 呼吸防护装置—用于逃生的带全面罩或口含器的肺控需求式自给式开路压缩空气呼吸器—要求、测试和标识 | NIOSH 42 CFR Part 84 Subpart K Approval of Respiratory Protective Devices-Air-Purifying Particulate Respirators 呼吸防护设备的审批—空气净化式颗粒物呼吸器 |
| EN 403 Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking 自救呼吸防护装置—用于火灾逃生的带头罩的过滤装置要求、测试、标识 | ||
| EN 1146 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking 呼吸防护装置—带逃生头罩的自给式开路压缩空气呼吸器—要求、测试、标识 | ANSI/ISEA 110-2009 Air-Purifying Respiratory Protective Smoke Escape Devices 空气净化呼吸防护烟雾逃生装置 | |
| EN 13794 Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking 呼吸防护装置—带逃生头罩的自给式闭路呼吸器—要求、测试、标识 | ||
| 工业用自给式呼吸器 | EN 136 Respiratory protective devices - Full face masks - Requirements, testing, marking 呼吸防护装置—全面罩—要求、测试、标识 | NIOSH 42 CFR Part 84 Subpart H |
| EN 137 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking 呼吸防护装置—带全面罩的自给式开路压缩空气呼吸器—要求、测试、标识 | ||
| EN 1146 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking 呼吸防护装置—带逃生头罩的自给式开路压缩空气呼吸器—要求、测试、标识 | ANSI/ASSE Z88.2 - 2015 Practices for Respiratory Protection 呼吸防护措施 | |
| EN 14593-1 Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking 呼吸防护装置—带需求阀的压缩空气管路呼吸器—第1部分：带全面罩的装置—要求、测试和标识 | ||
| 消防用自给式呼吸器 | EN 136 Respiratory protective devices - Full face masks - Requirements, testing, marking 呼吸防护装置—全面罩—要求、测试、标识 | NIOSH 42 CFR Part 84 Subpart H Approval of Respiratory Protective Devices-Self-Contained Breathing Apparatus 呼吸防护设备—自给式呼吸器 |
| EN 137 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking 呼吸防护装置—带全面罩的自给式开路压缩空气呼吸器—要求、测试、标识 | NFPA 1970:2025 Protective Ensembles for Structural and Proximity Firefighting, Work Apparel, Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services, and Personal Alert Safety Systems (PASS) 结构和近距离消防防护服、工作服、应急服务用开式自给式呼吸器 (SCBA) 和个人警报安全系统 (PASS) 标准 |
